Anker 341 USB-C Hub Review 2026 - A8346 Specs

Name: Anker 341 USB-C Hub (7-in-1)
Brand: Anker
SKU: A8346

The Anker 341 USB-C Hub, model A8346, is Anker's older but still widely sold 7-in-1 USB-C hub for laptops that need one HDMI monitor, a couple of USB-A ports, card readers, and passthrough charging from a single built-in cable. Anker's official page lists one USB-C Power Delivery input, one HDMI 1.4 port rated for 4K at 30Hz, two USB-A data ports rated at 5Gbps, one USB-C data port, one SD slot, and one microSD slot. The same page also makes the main limits clear: media display works only through HDMI, the USB-C ports do not output video, and the hub needs a host USB-C port that supports DisplayPort Alt Mode for the monitor connection. Amazon's US listing for ASIN B07ZVKTP53 showed a 4.5-star rating from 35,179 reviews during research, which gives this hub much more buyer history than most cheap USB-C adapters. It is not a Thunderbolt, USB4, DisplayLink, or Silicon Motion dock. Think of it as a travel and classroom adapter with charging passthrough, not a full desktop docking station.

Budget 7-in-1 USB-C hub with card readers

Pros & Cons

What We Like

Seven useful ports cover HDMI, USB-A data, USB-C data, SD, microSD, and passthrough charging
85W passthrough charging can power many thin-and-light laptops when paired with a 100W USB-C PD charger
SD and microSD card readers make it more useful than smaller HDMI-only hubs
Huge Amazon review base gives the A8346 more real-world history than most budget adapters
Driverless USB-C Alt Mode design keeps setup simple on supported laptops and tablets
Compact 4.61 by 2.1 by 0.57 inch body is easy to keep in a laptop bag

What Could Be Better

HDMI output is limited to 4K@30Hz instead of 4K@60Hz
Workaround: Use it for 1080p, 1440p, presentations, or light 4K office work. Choose the Anker 555 or another HDMI 2.0 hub for 4K@60Hz.
Only one external display is supported
Workaround: Choose a dual-output USB-C MST hub for compatible Windows laptops, a DisplayLink dock, or a Thunderbolt dock if you need two monitors.
USB-C data speed is ambiguous across official and retailer copy
Workaround: Use the USB-A ports for 5Gbps devices and avoid buying this hub specifically for fast USB-C SSD transfers.
USB-C charger is not included
Workaround: Pair it with a 100W USB-C PD charger and rated cable if you want the full 85W passthrough target.
No Ethernet or audio jack
Workaround: Choose the Anker 555 or a larger dock if wired networking or audio output matters.
PD-IN port is for charging only, not data or video
Workaround: Use HDMI for display output and the separate USB-C data port for peripherals.

Display Support

Max Displays: 1

1 display (Single HDMI output up to 4K@30Hz through HDMI 1.4 on a USB-C host that supports DisplayPort Alt Mode. The USB-C ports do not output video.)

3840x2160 @ 30Hz

Ports & Connectivity

USB Ports

2x USB-A 3.0

1x USB-C 2.0

1x USB-C 85W

Video Outputs

1x HDMI 1.4 / 4K@30Hz / HDCP 2.2

Card Readers

1x SD (UHS-I)

1x microSD (UHS-I)

Full Specifications

General
Manufacturer	Anker
Model	A8346
Release Date	2020-08
MSRP	$39.99
Connectivity
Host Connection	USB-C
Max Data Rate	5 Gbps
Driver Required	No (native)
Display Output
Max Displays	1
1x Display	3840x2160 @ 30Hz (Single HDMI output up to 4K@30Hz through HDMI 1.4 on a USB-C host that supports DisplayPort Alt Mode. The USB-C ports do not output video.)
Ports (5+ total)
USB-A 3.0	2x
USB-C 2.0	1x
USB-C	1x (85W)
HDMI 1.4 / 4K@30Hz / HDCP 2.2	1x
SD Card Reader	1x
microSD Card Reader	1x
Power
Power Input	USB-C
Laptop Charging	Up to 85W

Compatibility

Windows (7+)

Anker lists Windows 10, 8, 7, Vista, and XP support. HDMI output still requires a host USB-C, USB4, or Thunderbolt port with DisplayPort Alt Mode.

macOS (10.6+)

Anker lists Mac OS X 10.6 or later. It works as a single-display USB-C hub on compatible MacBooks, so it does not bypass Apple Silicon external-display limits.

Linux (2.6.14+)

Anker lists Linux 2.6.14 or later. HDMI depends on USB-C DisplayPort Alt Mode support and the Linux graphics stack.

ChromeOS

Anker lists Pixelbook compatibility. Chromebooks need a USB-C port with DisplayPort Alt Mode for HDMI output.

Known Issues

USB-C ports without DisplayPort Alt Mode

No HDMI output

Nintendo Switch

Listed as incompatible by Anker

USB SuperDrive

Listed as incompatible by Anker

Dual-monitor desk setups

Only one external display is supported

4K 60Hz monitor setups

HDMI is limited to 4K@30Hz

6.7 /10

Our Verdict

Good

The Anker 341 is easiest to recommend when the job is basic: plug a MacBook Air, Dell XPS, Chromebook, iPad, or Windows ultraportable into one HDMI display, connect a mouse or storage device, read an SD card, and keep the laptop charging through a USB-C PD charger you already own. The port mix is useful, the Amazon review base is huge, and Anker's own store still sells the hub at $39.99. The 85W passthrough rating is enough for many thin-and-light laptops if you pair the hub with a 100W USB-C PD charger and cable. The SD and microSD slots also make it more practical than the smaller Anker 332 if you move photos, audio files, or firmware images from cards. The trade-offs are the same ones that show up across budget USB-C hubs. HDMI is limited to 4K at 30Hz, which is fine for slides, documents, browser tabs, and occasional TV use, but it feels choppy on a 4K monitor used all day. There is no Ethernet, no audio jack, no second display output, and no included wall charger. Anker's current official spec table also conflicts with the broader marketing copy on the USB-C data port: the table calls the USB-C data port USB 2.0 at 480Mbps, while the Amazon title and comparison table describe the USB-C and USB-A data ports as 5Gbps. I would not buy the 341 for fast USB-C SSD work because of that ambiguity. Use the two USB-A ports for 5Gbps accessories, treat the USB-C data port as a convenience port, and step up to the Anker 555 if you want 4K 60Hz HDMI, Ethernet, and clearer 10Gbps data specs. For a low-cost one-monitor travel hub with card readers, though, the Anker 341 still makes sense.

Frequently Asked Questions

Does the Anker 341 USB-C Hub support 4K 60Hz?

No. Anker lists the HDMI 1.4 output at up to 3840x2160 at 30Hz. It can run a single 4K display for office work or presentations, but it is not a 4K 60Hz hub.

Can the Anker 341 charge my laptop?

Yes, if you connect a USB-C Power Delivery charger to the hub's PD-IN port. Anker says the hub can provide up to 85W to the laptop while reserving 15W for itself, and that a 100W charger and cable are required for the full charging target.

Is the Anker 341 a DisplayLink dock?

No. It does not use DisplayLink, Silicon Motion, Thunderbolt, or USB4 display tunneling. HDMI output comes from the laptop's native USB-C DisplayPort Alt Mode signal.

How many monitors does the Anker 341 support?

One external monitor. The hub has one HDMI port, and Anker says the USB-C ports do not support media display, including through USB-C to HDMI or USB-C to DisplayPort cables.

What ports are on the Anker 341 USB-C Hub?

It has a built-in USB-C host cable, USB-C PD input, one HDMI 1.4 port, two USB-A data ports, one USB-C data port, one SD card slot, and one microSD card slot.

Does the Anker 341 work with iPad Pro?

Anker says it works with iPad Pro when updated to iPadOS, but also warns that passthrough charging tablets and phones may be limited unless the adapter supports 15V, 45W. For laptop-style use, expect HDMI, USB accessories, and card readers to depend on iPadOS support for each device.

Head-to-Head Comparisons

Anker 332 vs Anker 341: Which Budget USB-C Hub Should You Buy?
A spec-by-spec comparison of the Anker 332 and Anker 341 USB-C hubs, covering HDMI limits, passthrough charging, card readers, USB ports, compatibility, and value.